Vonage line issue

[thephonelady]

I recently reinstalled a Partner ACS with Partner Mail VS. Both R4.The customer has 2 Vonage lines. I set up the Auto Attd to answer on 0 rings. The call was answered but I could not break throught the selector codes on either line. I looped a station into a line port and when I called the station/ line and the Auto Attendant answered, I was able to make every selection I tried. No issues with incoming or outgoing calls without the Auto Attd. Any thoughts?
Thanks in advance & Merry Christmas!!

 

[Dexman]

Not sure. I'd check the usual parameters...tone duration & accuracy, line voltage & current and compare to Telco standards.

I "FEATURE 00"

http://dexman.webs.com/

 

[WikiTech]

Another headache to look forward to, Thanks eyelean for the wakeup call - Duke