Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Volume Adjustment for each call

Status
Not open for further replies.

Mjamm

IS-IT--Management
Dec 24, 2001
88
US
The volume at the front reception phone isn't very good! The callers on in coming calls were almost inaudible; I can raise the volume, but need to for every single call. That can be the immediate fix: raise the volume as needed. Is there a way to permenantly raise the volume and leave it set? The issue is only on this phone and others do not have to adjust their phones.
 
Verify that the system programming is on receiver volume=set instead of system.

Swap handsets & cords with a known good one.

If it is on set volume it should stay at that level.

Other than that, do you have the "exact type of set" to swap with that one?



Steve
tele-dataservices.com
 
Some of the older M7310's won't hold set volume, they reset when hung up.
 
Also, is it just this set, or others?

If the volume is low everywhere in the system, you may need to adjust your CO distance settings if you are using POTS lines...
 
Sphoneman is correct.
Older sets do not hold the volume level on newer software even if it is set to "set volume"
What software version are you running?
What is the date on the phone (underneath)?
Do the phones say "Meridian" or "Nortel"?
These are somethings to look at, only after verifying it's not the handset.
Gabriel
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top