Voltage Probe Warning on PE2650

[harbudt]

Hi

We have a Dell PE2650 which for a while now has had an orange info display saying E0212 Volt 2.5. I went into OpenManage today and had a look at the voltage probes. On ESM MB 2.5V its current voltage is 2.676V. The maximum for the warning level was 2.676V hence I was getting the warning. I have put the threshold up to 2.724V to stop the warning.

What I want to know is why that voltage is so much higher than the rest of them and how I can properly fix it rather than upping the threshold.

Thanks

 

[burtsbees]

New VRM.

Burt

 

[maultier]

I've also seen similar errors when you have a card cage that was swapped in from another 2650. The cages look alike but don't match the motherboard in use (diff part numbers) and so, a 212 error occurs.