Voispeed->MD110->pstn configurazion

[sbancona]

Hi everybody,

I have to configure my MD110 to comunicate with an ip pbx Voispeed.

Incoming traffic is like below:


|----- SITE-A----| |----- SITE-B--------------------|
PSTN->MD110--[tlu76QSIG]--->MD110---[TLU79QSIG]--->Voispeed

outgoin traffic is like below:


|------------Site-B--------------------|
Voispeed---[TLU79QSIG]--->MD110--->Pstn

Now i can call from MD110 to voispeed an from voispeed to mdd110

I can also call from external number to voispeed if external number is not a mobile.

If external number is a mobile i notice that the last digit of the called number is cutout:

i configured extension number 87xxx on Voispeed. Tracking the isdn card of voispeed i notice that if the call is from a mobile, the called number become 87xx.

the outgoing call out of the md110 do not work.

The system is BC12

on site-A I use rou 10 to go to site B the configuration is like below:

<ROCAP:ROU=10;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
10 0110000010000010 4 2001000000 0 30 128 00151515 100000000000 001100
<rodap:ROU=10;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
10 TL25 H'00000010 H'00000002 H'00001072 NO
<roddpEST=87;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
87 10 0505100000000250005001000 0 1 0

on site-B I use rou 130 to go to voispeed; the configuration is like below:

<rocap:ROU=130;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
130 7130000000000010 5 2110000001 0 30 128 03151515 511100000031 111111
<RODAP:ROU=130;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
130 SL60 H'00000214 H'75540000 H'06300000 NO
<RODDPEST=87;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
87 130 0005000000000250000000000 0 1 0



I bag you pardon for my bad english. Thanks for help.