VOIP

[krasemeer]

try to connect cs1000 rls4
to BCM USING H323 protocol. all nedded progrmm done.
DSC is 3 with flen 3, when i dialed 320 on BCM it keep silent.trace it and get :

trac 0 320

TRA122

.trac 0 666

ACTIVE VTN 072 0 00 00

ORIG VTN 072 0 00 00 KEY 0 SCR MARP CUST 0 DN 666 TYPE I2002
MEDIA ENDPOINT IP: 172.30.3.88 PORT: 5200
TERM VTN 089 0 00 07 VTRK IPTI RMBR 5 8 OUTGOING VOIP GW CALL
FAR-END H.323 SIGNALLING IP: 0.0.0.0
FAR-END MEDIA ENDPOINT IP: 0.0.0.0 PORT: 0
MEDIA PROFILE: CODEC n/a A-law PAYLOAD 1 ms VAD OFF
DIAL DN 320
MAIN_PM DIAL AUX_PM COMPLETE
TALKSLOT ORIG 19 TERM 83
EES_DATA:
NONE
QUEU NONE
CALL ID 0 269


AUX NARS



---- ISDN ISL CALL (TERM) ----
CALL REF # = 392
BEARER CAP = VOICE
HLC =
CALL STATE = 3 OUTGOING
CALLING NO = 6666 NUM_PLANRIVATE TON:ABBREVIATED ESN:CDP
CALLED NO = 320 NUM_PLANRIVATE TON:ABBREVIATED ESN:CDP

when test the root ,h323 in NRS ,it`s success and registerd.

 

[Triton101]

NRS, can you simulate the call on the NRS? Do you have a CDP entry in the NRS point to the BCM?

Try pinging the BCM from the VGMC card if you have the above. Also if you made IP changes, then DIS and ENL the Virtual DCH.