Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VoIP worked, now calls fail

Status
Not open for further replies.
photon33

photon33

Programmer
Oct 5, 2003
217
US
BCM50 networked to BCM400 over VPN.

calls from BCM400 work fine to the BCM50.

When you dial from the BCM50 it picks up a voIP trunk and then the call disappears. BCM Monitor shows cause is Normal Clearing & detailed release reasons fail to display anything.

From the BCM 50 if I dial a BCM 400 extension that is not plugged in, release reasons does say user unavailable, though.

This was working last week....
 
Status
Not open for further replies.

Similar threads

Jonnyt68
  • Locked
  • Question
VOIP phones over multiple IP sites
Replies
1
Views
86
curlycord
curlycord
AShammah
  • Locked
  • Question
BCM call pilot sending calls straight to General Delivery mailbox
Replies
5
Views
149
curlycord
curlycord
gberger
  • Locked
  • Question
Bcm50R3 Bcm50/450 replacement Hard Drive Failed 3
Replies
8
Views
309
Firebird Scrambler
Firebird Scrambler
chiden
  • Locked
  • Question
Forwarding Calls Externally
Replies
7
Views
137
curlycord
curlycord
AShammah
  • Locked
  • Question
BCM50 Voip.ms sip trunk & call route setup 1
Replies
10
Views
208
AShammah
AShammah

Part and Inventory Search

Sponsor

Back
Top