Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VOIP Vlan config!

Status
Not open for further replies.
petegr

petegr

IS-IT--Management
Jun 27, 2005
1
GB
Hi all,
Am new to this site! I am having trouble with a pilot VOIP project, specifically with configuring a Vlan for the VOIP to run on. The Vlan is setup fine on the core passport 8080, and on a few baystack 470's via fibre channels my question is... how the hell do I configure the Vlan to cover a regular port on the switch that is connected to a WAN link? seems to me that the port will need to be configured for both Vlans as it is a normal network port on the baystack and not part of our fibre network.

thanks in anticipation of any help!
 
Status
Not open for further replies.

Similar threads

Jonnyt68
  • Locked
  • Question
VOIP phones over multiple IP sites
Replies
1
Views
83
curlycord
curlycord
R
  • Locked
  • Question
Assistance with BCM450 Troubleshoot - Boot Loop - FPGA Configuration Error...
Replies
13
Views
697
rhol.bll
R
AShammah
  • Locked
  • Question
BCM50 Voip.ms sip trunk & call route setup 1
Replies
10
Views
203
AShammah
AShammah
curlycord
  • Locked
  • Question
Voip carrier - ext calling without DID's
Replies
2
Views
91
curlycord
curlycord
koulioumbis
  • Locked
  • Question
BCM50R6 voip trunk calls drop after 90 seconds
Replies
8
Views
94
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top