VoIP Trunks Won't Enable

[BogeyShooter]

BCM400 with the latest patches (sys update 23) installed. I DISABLED then ENABLED the VoIP trunks but they won't ENABLE. Keycodes are there and active. Can't reboot BCM till after hours. BCM still connected to the network. No changes were made. Telephony and vmail work.

Any suggestions?

 

[BogeyShooter]

More info:

This is software 4.0. Networked with other BCM50's. Everything was working before the IP trunks were diabled and then enabled.

 

[BombOne]

restart the service called FEPS, and see if that fixes it, that is the service that makes VOIP trunks work. It will only affect the VOIP trunks.

 

[gberger]

Go to service manager under "administration" and restart the "feps" service, that's what controls your VoIP trunks.

 

[BogeyShooter]

I checked services and feps was active and running. I restarted it anyway and that brought the IP trunks back. Thanks for your help guys.