Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VOIP Routers
- Thread starter Vmail
- Start date
If you use an external router it needs to support difserv
Limitations
this is hard to qualify, top end routers offer many advanced functions which are rarly used.
these features are not implemented in the IPO which origanly only supported Static routing & NAT, although additional features have been added in V2.0+ (RIP & VPN tunneling)
If you only require Site to site routing then the IPO is more than capable, if you realy require RIP, Vlan, VPN & any other bells & whistles then a dedicated router is probably better.
Limitations
this is hard to qualify, top end routers offer many advanced functions which are rarly used.
these features are not implemented in the IPO which origanly only supported Static routing & NAT, although additional features have been added in V2.0+ (RIP & VPN tunneling)
If you only require Site to site routing then the IPO is more than capable, if you realy require RIP, Vlan, VPN & any other bells & whistles then a dedicated router is probably better.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question