Let me put a problem to you !
We have a large network segregated into multi subnets (class B)Each subnet has a 6500 which connects back to a core
We also have satellite sites that have a class c network
The voice is running on a seperate subnet eg Data 100.20.0.0, Voice 100.30.0.0
The satalite sites are connected over a les 100 circuit. with 2 subnets 100.8.50.0 /23 and 100.8.52.0/23 data and voice
We have a problem where from only 1 of the subnets we can call a satellite the call engages but cannot here at one end ( satellite end ). From all the other subnets its fine. It is only effecting one subnet to 1 satellite all other combinations are fine.
Routing is fine all can ping each other with no loss of packets.
Any Ideas, apart from wiping all the configs and re-installing from fresh.
Cheers
We have a large network segregated into multi subnets (class B)Each subnet has a 6500 which connects back to a core
We also have satellite sites that have a class c network
The voice is running on a seperate subnet eg Data 100.20.0.0, Voice 100.30.0.0
The satalite sites are connected over a les 100 circuit. with 2 subnets 100.8.50.0 /23 and 100.8.52.0/23 data and voice
We have a problem where from only 1 of the subnets we can call a satellite the call engages but cannot here at one end ( satellite end ). From all the other subnets its fine. It is only effecting one subnet to 1 satellite all other combinations are fine.
Routing is fine all can ping each other with no loss of packets.
Any Ideas, apart from wiping all the configs and re-installing from fresh.
Cheers