VOIP Paging 1

[stevomorrison]

I have to BCM 50 2.0 systems with SIP trunks between them. Is there a way a user in one system can page to the other system.

 

[Deweyhumbolt]

Not through the BCMs SIP connection. I hear there are other ways, some type of VoIP paging accessory.

Adversity is Opportunity

 

[endlesswinter]

Hook your paging system to a trunk port then build a remote access package to that line.

 

[SupportDude]

Check this out ...

http://voip.valcom.com/

-SD-

http://www.mysupportguy.net

 

[stevomorrison]

The remote access package is a good idea but the systems have long distance charges between them.

I wonder if the hardware from valcom will only page external speakers and not nortel sets. By reading the site it doesn't seem as though you can

 

[SupportDude]

Yes, it will.
Distance doesn't matter, it works over the network.

-SD-

http://www.mysupportguy.net

 

[stevomorrison]

Do you mean it will work over nortel sets. The distance part i was referring to was using the remote access package on an analog trunk. I meant long distance charges not physical distance

 

[SupportDude]

It will page external speakers.

-SD-

http://www.mysupportguy.net

 

[endlesswinter]

What Im refering to is a trunk port from system B hooked to the paging interface. Then give system A access to that trunk(with remote access package) and page away. No calls are made your using the network to access the trunk.

 

[Deweyhumbolt]

That sounds possible, have you done it succesfully before?

Adversity is Opportunity

 

[endlesswinter]

yes.

 

[stevomorrison]

Thanks guys. I knew there was a way just didn't understand at first. I am going to test at my office. It guess it won't page internal zones will it?

 

[Deweyhumbolt]

No.

Adversity is Opportunity