VOIP on Magix

[dudeEWin]

Does the Magix supports Voice over IP? If yes, what modules are needed?

 

[merlinman]

VOIP is not built into the Magix. You can use external devices such as those made by MULTI-TECH Systems, and connect them to the Magix Trunk and or Station ports.

 

[coladmin]

I am using a VOIP solution from Cisco. The Magix is linked to the cisco routers on each end via a T-1(100DCD board. The call quality is excellent and has been very reliable

COLADMIN

 

[mjwilson12379]

I am going to be doing the same thing for some of our branch offices, but we only need a line from location to location for interoffice calling. Looking at the Multitech. What is your setup like merlinman? Do you use a CO line hoooked up to the multitech gateway on each end and setup the ARS to use it for those numbers? How is the quality, minimum bandwidth requirements, etc?

------------------
Michael Wilson
Dir. of I.T.
REMAX Allegiance

 

[agpham]

If you are using the Multi-Tech product, Call Greg Thatcher +1 (763) 717-5592 specializes in the Merlin Legend/Magix product in their tech support.