Voip link Argent Branch to IPO 2.1

[IPAlot]

Would any features at all work with this or have the architectures become to different

Soopa Doopa Intergalactic IP Office installation mechanic and configuration corruptor from way back.

 

[intrigrant]

There is a build for the Argent that should (could) work, check the

http://www.avaya.co.uk

site, i believe it is 2.3 software with additional RAM in the system.
I have never tried myself.

 

[AlawDutch]

Yes you can connect IP-Office to ArgentBranch but ....
You have to use software version 2.3 on the ArgentBranch. To be able to use this version you have to upgrade memory with 64MB 133 Mhz DIMM module.
You can't take the software version of IP-Office higher then version 1.3 (equal to ArgentBranch 2.3)

If you agree to these rules everything works fine.
We have several sites working this way.
Please remember you have (all) the bugs that are know for version 1.3 IP-Office.

 

[Raffles666]

If you just use basic VoIP then all should be fine - SCN wasn't a feature of 1.3 as far as I remember. So it's a visit to the shortcode shop

Unless, of course, SCN was in 1.3 and my memory is failling...

cheers



Old school Alchemy engineer - trying to keep up with the times

 

[IPAlot]

The short code shop, just might pay it a visit and get some good ones for christmas

Soopa Doopa Intergalactic IP Office installation mechanic and configuration corruptor from way back.

 

[IPGuru]

SCN hasd been in IPO from 1.0 upwards, it is not supported by the alchemy system though so you will require shortcodes.