Hi
We have as5300 that we use for VOIP termination; one of our customers is using an Arelnet – any try to contact I receive "incompatible destination".
The customer doesn’t know how to configure the router, his codec his 723.1
Can I configure my AS5300 so he can go through?
The history from the Cisco:
AB74 : 2516181hs.3119 +-1 +0 pid:7 Originate 01234567890
dur 00:00:00 tx:0/0 rx:0/0 58 (incompatible destination)
Telephony 2
(3128): tx:0/0/0ms g729r8 pre-ietf noise:0dBm acom:0dBm
AB74 : 2516200hs.3120 +-1 +1 pid:8 Originate 01234567890
dur 00:00:00 tx:0/0 rx:0/0 58 (incompatible destination)
Telephony 3 (3129): tx:0/0/0ms g729r8 pre-ietf noise:0dBm acom:0d
Thank you for your answers
Ealan
We have as5300 that we use for VOIP termination; one of our customers is using an Arelnet – any try to contact I receive "incompatible destination".
The customer doesn’t know how to configure the router, his codec his 723.1
Can I configure my AS5300 so he can go through?
The history from the Cisco:
AB74 : 2516181hs.3119 +-1 +0 pid:7 Originate 01234567890
dur 00:00:00 tx:0/0 rx:0/0 58 (incompatible destination)
Telephony 2
(3128): tx:0/0/0ms g729r8 pre-ietf noise:0dBm acom:0dBmAB74 : 2516200hs.3120 +-1 +1 pid:8 Originate 01234567890
dur 00:00:00 tx:0/0 rx:0/0 58 (incompatible destination)
Telephony 3
(3129): tx:0/0/0ms g729r8 pre-ietf noise:0dBm acom:0dThank you for your answers
Ealan
