Voicemail transfer

[endlesswinter]

I have 2 BCM 400 4.0 both have MCDN, tied with point to point T1. System A has a PRI that both systems share. The calls route fine between the sights over voip trunks. Both systems have their own auto attendant and mailboxes. My question is if a call goes to the auto attendant is it possible to dial an extension on the remote system?

system A is 2xxx system B is 3xxx

 

[danthephoneman]

Under system properties in callpilot, check the box next to enable network transfer.

 

[endlesswinter]

thank you dan.