loopretnav
Technical User
When soomeone get into their mailbox,
sometimes the system asks for the users password again.
sometimes the system asks for the users password again.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VoiceMail Issue
- Thread starter loopretnav
- Start date
- Status
Oh ya... That's because of <fill in Blank>... and you did not set <fill in blank>... This is quite common on your <fill in phone system/voicemail type here>.
Hey bud, sorry to razz ya, but we need lots of info if you want our help. What type of Mitel phone system, voicemail type, how are your users logging in, is it from a set on the system or is it remote access?
**************************************
My Biggest problem is that I almost always believe what I tell myself.
Hey bud, sorry to razz ya, but we need lots of info if you want our help. What type of Mitel phone system, voicemail type, how are your users logging in, is it from a set on the system or is it remote access?
**************************************
My Biggest problem is that I almost always believe what I tell myself.
- Thread starter
- #3
loopretnav
Technical User
This is from a 3300ICP and the user is at their own set
5212.
5212.
Thanks,
I have had some users experience similar issues at times. Usually, it had something to do with them using the speakerphone function, they were dialing the wrong password, or they dialled the password too soon or quickly.
Do your users eventually get in? If they eventually get in, then it is most likely not the password being incorrect.
To test, I would first try with the handset. The speakerphones on those sets are not the best and if memory servers correct, it is only half duplex. That means that you only get one way audio depending on which end is transmitting. If it is good there, then try again on speakerphone, this time turn off the microphone. The microphone may be picking up something that is interupting the call.
Good luck!
**************************************
My Biggest problem is that I almost always believe what I tell myself.
I have had some users experience similar issues at times. Usually, it had something to do with them using the speakerphone function, they were dialing the wrong password, or they dialled the password too soon or quickly.
Do your users eventually get in? If they eventually get in, then it is most likely not the password being incorrect.
To test, I would first try with the handset. The speakerphones on those sets are not the best and if memory servers correct, it is only half duplex. That means that you only get one way audio depending on which end is transmitting. If it is good there, then try again on speakerphone, this time turn off the microphone. The microphone may be picking up something that is interupting the call.
Good luck!
**************************************
My Biggest problem is that I almost always believe what I tell myself.
MitelInMyBlood
Technical User
I've had occasional users in accousticly harsh rooms/offices experience the same problem and in most cases having them pick up the handset while entering their PW solved it. I suspect some issue w/accoustic feedback being misinterpreted by the EMEM.
Saw that a long time ago with the old SS4/COV instruments on the SG.
Saw that a long time ago with the old SS4/COV instruments on the SG.
- Status
Similar threads
- Locked
- Question