Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Voice Mail

Status
Not open for further replies.

taino0221

Technical User
Oct 22, 2009
1
US
Message light does not turn off after messages have been listened to
 
Is this issue for one phone or your whole system ?

How are you retrieving the messages ?

If you are using notify me and listening to your message from your PC then the light will not shut off.

If you are calling directly from the phone and the light is still on try a stat sta xxxx (xxxx being the station with issue) and on page 1 under "Message Waiting" does it read "spe" or "vm server" ?
 
Check 'change station xxxx' command and look under message lamp Ext:xxxx make sure this matches the extension you are using.
 
What type of integration? Direct SIP? Session Manager?
What version of AAM?

If going in via Session Manager, run a traceSM and ensure that the Session Manager is getting the NOTIFY message to turn off the MWI. You can filter the traceSM with -u XXXX to only show results for the extension. If you don't see a NOTIFY come across after clearing a mailbox of new messages (which should trigger a MWI Off to the switch) and then see CM reply with a confirmation then I would start in SM/SMGR.

 
Need more info. I assume that the light comes on fine ? How is the user hearing the message ?

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top