Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Voice mail to multiple mailboxes 1

Status
Not open for further replies.

SnakeDr

MIS
Mar 18, 2002
12
US
Hi,
Im new to this stuff and I need to change a voice mail extension that is part of a list of voicemailboxes that receives a single message when the user records then presses *5 and then 1 when prompted for list id. How do I modify the list that contains those VM boxes?

Thanks
SnakeDr
 
Everything you ever wanted to know and more.




Create List
1. Press 5 1 1 from the Activity Menu.
2. Enter list ID (up to 6 letters or digits) and press #.
3. Press one of the following:
- 1 to make the list private.
- 2 to make the list public.
4. Enter an address and press #.
5. Repeat step 4 until list is complete.
6. Press # to approve.
Delete List
See Scan List Summaries below.
Scan List Summaries
1. Press 5 1 2 from the
Activity Menu.
2. Listen to the list
summary.
3. Press any combination
of the following:
- # to skip to next list.
- * D or * 3 to delete
the entire list.
- 0 to review/modify
list members.
(Go to step 4 of
Review/Modify List.)
Mailing Lists
Tips
When creating a list, you
can also append an
existing list by entering
* L or * 5 (at step 4).
NOTE: after you
append a list, the system
asks for more
extensions. Do not add
extensions of the list just
appended.
Specify an address as a
number or name —
press * A or * 2 to
switch modes. (See the
alphabetic keypad reference
on p. 34.)
Delete addresses in
two ways: 1) Review the
list until you find each
address, then press * D
or * 3; or 2) At step 4 on
page 27, press 1 immediately,
enter the
address to be deleted,
and press * D or * 3.
Repeat for other
addresses. Look!!! New Buttons
Same amount of time!

Thanks All Phoneman2
 
Thanks Phoneman2 that was the answer to my problems!

-Pat
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top