voice mail showing on two different phones

[OKSTATEFAN]

Using MARP I have setup a phone that rings at two different sets at the same time, and this works fine. Now what the person want’s is that when she gets voice mail that the message lamp lights up on both sets. Anyone know how to do this? Thanks.

 

[hawks]

It want light both as far as I know bit there is a key that you could out on one of the sets that will flash. That way 1 will light and the other will flash. Someone here has set this up before.

 

[SysTech2]

Voice mail light will light up as long as it's on key 0 or a unique dn.

 

[johnpoole]

youn can change the non-marped set's mwi key to a xmwk or rmwk, that lets a lamp light on both sets

john poole
bellsouth business
columbia,sc

 

[lretrievers]

Are you running Call Pilot or Meridian Mail? Call Pilot 4.0 allows multiple message waiting indicators on up to 8 sets; If not, johnpoole's recommendation is the one that works best. However, if the DN appearance for the voicemail box are both on KEY 0, you may want to change where these DNs appear on the set.

On one set KEY 0 can be the mailbox #. Where you put the RMWK or XMWK key, make the DN key appear on the phone anywhere other than KEY 0.

 

[OKSTATEFAN]

John, How do you do that?