Board4aLiving
IS-IT--Management
Hello all!
I have recently ran into problems with IPO 403/406 with both 4 port and 16 port analog trunk modules. Lines would either dial incorrect digits, drop off in middle of convo, or when calling into auto attendant on a menu action(vmail pro) not allow digits to be entered. I am running 1.4(22_15) After many hours with tier 3/4 the fix was to set the voicemail recording level to low on all lines. Due to many customers complaining of low message volume I usually set all lines to medium or high even before installation. Just figured I'd let you all know so as to save you many hours of confusion and to get home from work on time. Lord knows I don't see much of that happening when working on the IPO
Board4aLiving![[cannon]](/data/assets/smilies/cannon.gif "[cannon] [cannon]")
I have recently ran into problems with IPO 403/406 with both 4 port and 16 port analog trunk modules. Lines would either dial incorrect digits, drop off in middle of convo, or when calling into auto attendant on a menu action(vmail pro) not allow digits to be entered. I am running 1.4(22_15) After many hours with tier 3/4 the fix was to set the voicemail recording level to low on all lines. Due to many customers complaining of low message volume I usually set all lines to medium or high even before installation. Just figured I'd let you all know so as to save you many hours of confusion and to get home from work on time. Lord knows I don't see much of that happening when working on the IPO
Board4aLiving