Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Voice Call ?

Status
Not open for further replies.
Tom4848

Tom4848

Technical User
Mar 5, 2003
37
US
When using the Voice Call featue on Norstar is the volume louder on the called party end then a "normal" handsfree intercom call?
Thanks and Merry Christmas
Tom
 
Sort by date Sort by votes
Some folks might be startled by the tone preceding the voice output, and think the voice output is louder for that reason.

...just my $0.02....
 
Upvote 0 Downvote
Thanks! What is the best way to ensure that the speaker is always at the loudest setting?
Thanks
Tom
 
Upvote 0 Downvote
Raise the volume up on the bar when speaker phone is engaged.
That should do it.
Gabriel
 
Upvote 0 Downvote
right....but will it stay at that level?
 
Upvote 0 Downvote
the volume level is set to default at a preset system setting unless you change volume to "set" in programming.if not changed it will alway revert back...unless your working on a 8x24 ksu in that case it would allways default to the set setting

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 
Upvote 0 Downvote
I thought that was only for the handset. I have played with the speaker phone volume with the setting on system and on set, and it did not change the volume.
Anyone?
Gabriel
 
Upvote 0 Downvote
maybe ...try it if you have not already

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 
Upvote 0 Downvote
I thought I had replied to this once, but maybe my answer got nixed, or I didn't hit the submit key.

Anyway, Gabrial is correct, all volumes stay adjusted except for the handset. It used to be a safety issue when Norstar first came out. The other volume adjustments usually have to be re-adjusted if the system looses power.

MarvO said it
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Michael OConnor
  • Question
Call Pilot 150 External Transfer Not Working
Replies
4
Views
316
curlycord
curlycord
kmpp
  • Locked
  • Question
Nortel Call Pilot
Replies
6
Views
251
curlycord
curlycord
UTelUs
  • Locked
  • Question
call pilot
Replies
2
Views
181
UTelUs
UTelUs
Spragers
  • Locked
  • Question
Voice mail ending up at wrong extension
Replies
11
Views
249
curlycord
curlycord
MIKEY-MIKE7
  • Locked
  • Question
NORSTAR CICS 4X16 CALL FOWARDING OUTSIDE
Replies
2
Views
149
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top