VoIBE Card not getting ping response

[rafiqnextech]

Hi,
Please help to troubleshoot of iPLDk300 VoIBE card functions.
Module LED status shows OK
Eth Port-2 (upper port) connected and suddenly card fails to communicate and now no ping response.

Checked through PC Admin and everything setup ok (cross check with backup copy and downloaded aslo)

How can monitor or find out the trouble point.

Using remote monitor, shows the 12 ports status idle.

Please help to identify and solution.

Thanks

Rafiq

 

[martinhodge]

take a back up of the system . default the system . and try again with a very basic settings . try removeing the card and reseating it also .

 

[montyzummer]

telnet into the system and use the brandy as descibed in the below thread , ? will give you the commands but you can run some pretty involved troubleshooting , test the boards etc etc

http://www.tek-tips.com/viewthread.cfm?qid=1674380

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.