Hi everyone
I have VNS set up between two sites. Op11 to Op51
With just using the Public Network for VNS it works fine.
But when adding a two private 4 wire E&M ties as first choice, with public network as second choice route, the following happen.
Digital Set calls using the 4 wire trunks don't support keypad DTMF tone on the orignators set.
Public Network VNS ties (2nd route)works okay.
Using ACOD+number works fine on the 4wire tunks.
Has anyone heard of Digital Sets having this problem only on some routes under VNS?
Steve
I have VNS set up between two sites. Op11 to Op51
With just using the Public Network for VNS it works fine.
But when adding a two private 4 wire E&M ties as first choice, with public network as second choice route, the following happen.
Digital Set calls using the 4 wire trunks don't support keypad DTMF tone on the orignators set.
Public Network VNS ties (2nd route)works okay.
Using ACOD+number works fine on the 4wire tunks.
Has anyone heard of Digital Sets having this problem only on some routes under VNS?
Steve
