Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VMX 200 Schedules
- Thread starter jamie2
- Start date
Hi jamie
You can have up to 8 time periods in a schedule.
Just use .a sch to add an INFO table.
If you list the whole schedule table with .l sch
you will see that there is a default time period that thakes care of the hours NOT listed in the time periods.
In the example below INFO 11 is used during the
working hours 9 to 17 during the week and the default
Info 10 takes care of the rest.
SCHEDULE FOR COS 10 (MAILBOX COS)
PERIOD DAYS START STOP INFO TABLE#
1 -MTWTF- 09:00 17:00 11
DEFAULT . . . . . . . . . . . . . . . . . 10
doktor
You can have up to 8 time periods in a schedule.
Just use .a sch to add an INFO table.
If you list the whole schedule table with .l sch
you will see that there is a default time period that thakes care of the hours NOT listed in the time periods.
In the example below INFO 11 is used during the
working hours 9 to 17 during the week and the default
Info 10 takes care of the rest.
SCHEDULE FOR COS 10 (MAILBOX COS)
PERIOD DAYS START STOP INFO TABLE#
1 -MTWTF- 09:00 17:00 11
DEFAULT . . . . . . . . . . . . . . . . . 10
doktor
jon24422531
Technical User
jamie2
Did this resolve your problem or do you need more help?
Jon
Did this resolve your problem or do you need more help?
Jon
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question