Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VMPro How to disconnect an Administrator from VMPro client?
- Thread starter Joledur
- Start date
TaureanDragon
Technical User
Used to be able to do it by trying to connect another client.
If the First Client connection had been inactive for a time (can't recall if it was configurable), it would get kicked off in favour of the second (I recall the first would get notified it had been disconnected, can't recall if informed it was going to get kicked off). Could then disconnect the second client.
If However the first Client is in continual use, not sure.
.......but hey, last time I used one of these was a decade ago
and things are likely to have changed.
.....only connected up to see if I could find someone...
If the First Client connection had been inactive for a time (can't recall if it was configurable), it would get kicked off in favour of the second (I recall the first would get notified it had been disconnected, can't recall if informed it was going to get kicked off). Could then disconnect the second client.
If However the first Client is in continual use, not sure.
.......but hey, last time I used one of these was a decade ago
and things are likely to have changed......only connected up to see if I could find someone...
- Status