This is an 8.1.(73) IPO. I can login to the UCM module just fine with Administrator/Administrator but when I try to use the VMPro Client to login to the UCM it says "User Login Failed". I've rebooted everything, and actually tried to go to the /opt/vmpro folder with winSCP and actually take the vmdata.mdb file, import it, make changes, save, export, and put back on the /opt/vmpro but even then it still doesn't take my changes. I'm wondering why the vmpro doesn't connect though? Firewall is off.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VMPro Client won't connect to UCM Module
- Thread starter 4vayaMan
- Start date
4vayaMan, do you only have the client installed or also the service on your PC?
I have had this issue in the trials and it seemed to be an issue where the VMData.mdb had no rights to get copied from the UCM to the laptop used.
Can you check that?
BAZINGA!
I'm not insane, my mother had me tested!
I have had this issue in the trials and it seemed to be an issue where the VMData.mdb had no rights to get copied from the UCM to the laptop used.
Can you check that?
BAZINGA!
I'm not insane, my mother had me tested!
- Status
Similar threads
- Locked
- Question
