VMPro and Transfer Over SIP Trunk

[Pandey2000]

Hello ...

I've Configure a SIP trunk between Avaya IPO and Cisco Call Manager, Now the Customer need to transfer from VMPro to Extn. on Cisco Call Manaer, is this acceptable ??? or is there a work around way to satisfy this ?

Thanks in Advance

 

[tlpeter]

You can transfer from vmpro.
As long as the extension's can be dialed from the IPO then vmpro can do it too.

BAZINGA!

I'm not insane, my mother had me tested!

 

[Pandey2000]

Hi tlpeter ,,,

I try it, but its not working.
Just in the destenation put the Extn. number or there is an additional programming.

 

[amriddle01]

Have you checked that desk to desk dialling is working between the two systems?

 

[Pandey2000]

Hi ...

ya, its working ...

 

[tlpeter]

Do you have a SIP URI programmed in the system for voicemail?
You need to set this in the IPOffice.

BAZINGA!

I'm not insane, my mother had me tested!

 

[Pandey2000]

Hi tlpeter ,,,

No I dont Have, Can you tell me How to Setup this ?

Thanks,
Regards

 

[Pandey2000]

Dear tlpeter,

Please if you can help me how to set this ??

Thanks

 

[derfloh]

Look under IPO System-Voicemail

 

[Pandey2000]

Thanks derfloh,

whats must I fill in this field,
SIP Name, SIP Display Name (Alias), Contact.
Is this field for Cisco Extn thats I'm already programmed in Destination tab of the transfer on VMOro

Thanks