Hi guys,
The VMPro GoTo Action allows you to connect a caller to another module or start point.
You can select either a start point or a system variable as destination of the GoTo action.
If you select a start point, it works fine.
If you select a system variable (such as $CLI or $VAR), it doesn't work !!!
Whereas, knowledge base says it should work...
For exemple, it should allow to route a call from CLI 12345 to a module named 12345.
I've unsuccessfully tried both 3.2.30 and 4.0.5 VM Pro releases.
Any help would be great...
Nicolas RAYNER
ACS Implement & Maintain
AVAYA France - PreSales Team
The VMPro GoTo Action allows you to connect a caller to another module or start point.
You can select either a start point or a system variable as destination of the GoTo action.
If you select a start point, it works fine.
If you select a system variable (such as $CLI or $VAR), it doesn't work !!!
Whereas, knowledge base says it should work...
For exemple, it should allow to route a call from CLI 12345 to a module named 12345.
I've unsuccessfully tried both 3.2.30 and 4.0.5 VM Pro releases.
Any help would be great...
Nicolas RAYNER
ACS Implement & Maintain
AVAYA France - PreSales Team
