I'm running an MM3.1 with 2 MAS and 1 MSS. These are not on the company domain. We had SAL implemented and when the tech went to onboard the 2 MAS Servers there needed to be some config done via the Voice Mail Configuration. This was done on 1 of the MAS Servers, but on the other there was no VM Config icon, nor was it in programs. How does that get installed or is that by design that it only sits on 1 of the servers?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VM Config Icon Missing
- Thread starter wpetilli
- Start date
You should be able to do everything on the one MAS that has the VMSC icon. But they both should have it.
The program is acsconfig.exe in the tools \admin folder or just do a search for the file.
If it is not on the server then you have bigger problems.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
The program is acsconfig.exe in the tools \admin folder or just do a search for the file.
If it is not on the server then you have bigger problems.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Status
Similar threads
- Locked
- Question
- Locked
- Question