is it possible to make vlan tagging on a IP500 with ip phone 5610SW (i use a cisco 3750 PoE switch)
I have to different Vlan (one for the phone and the second for the data). The customer will use the switch on the phone to connect PC.
The phones can be set up to tag the VLAN. I am not sure with the 500 but you could just put it into the VLAn with a static address. If you use DHCP Option 176 then your phones can be set up to get DHCP, VLAN and Call server and TFTP info all on bootup with no input from the phone.
You need to be careful that apps on normal network PC's can still talk to the IPO, so will need inter-vlan routing somewhere. The 3750 can do this, not sure if it need the Enhanced image or not.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.