Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VLAN setup in Linksys SRW2048

Status
Not open for further replies.

starbase9

IS-IT--Management
Oct 18, 2010
1
ES
Hello!!

I need some help, we are experiencing some overload i our network and we have aquired a layer3 switch linksys SRW2048. We want to create two separated group of computers that shares the same DSL Internet router.

How I have to setup this configuration in my switch? I have to define all ports as 'access' and the port where router is plugged as 'general'?

I need to change the IP of one of the computers on VLAN2 or can I maintain the same IP that they have now? (I meant to define 192.168.0.2-100 for VLAN1 and 192.168.0.101-254 for VLAN2)

Thanks a lot and kind regards! :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top