Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Vlan Setup Drawing, am I missing anything?
- Thread starter hydruid
- Start date
Make the management vlan some obscure number, like 317...
/
tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!
/
tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!
Switch D& F must have both voip and access vlans if you plan to to connect laptop to voip phones.
Move fibre uplink from Switch E to switch F, with a fiber media converter, or just use copper will do the job (unless there's 300 feet distance that preventing you).
I would simpley replace that E, if possible.
I assume you have a L3 device for inter-vlan routing and that the interface are trunked and proper encap protocols. Also, don't forget vtp domain, vtp password, vtp version, etc....
Lastly, replace switch E with cisco switch the Nortel BCM with Cisco CME. JK.
No seriously, it will make your job much easier when comes troubleshooting.
Move fibre uplink from Switch E to switch F, with a fiber media converter, or just use copper will do the job (unless there's 300 feet distance that preventing you).
I would simpley replace that E, if possible.
I assume you have a L3 device for inter-vlan routing and that the interface are trunked and proper encap protocols. Also, don't forget vtp domain, vtp password, vtp version, etc....
Lastly, replace switch E with cisco switch the Nortel BCM with Cisco CME. JK.
No seriously, it will make your job much easier when comes troubleshooting.
- Status
