Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vlan settings wont survive reboot.

Status
Not open for further replies.

IPGuru

Vendor
Jun 24, 2003
8,391
GB
fedora 8
I am setting Vlan 10 on my sever which woks ok however after a reboot I need to reactivate eth0.10 manualy

is there anything stupid i am missing?
 
for VLANS eth0 should not be bound to any IP address and you should have a config file for your VLAN interface etc/sysconfig/network-scripts/ifcfg-eth0.10
Is this the case?
 
everything seemed ok but the network required restartig after the system was booted.

I have now adopted Universal plan B: (When all else fails CHEAT)

I have created a script that checks for the existance of the VLan & if not present restart the network
then set this a a cron job to run on a regular basis

It is not an elagant solution but it works
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top