VLAN on Cisco Access Point

[bkesting]

I have a Cisco 1200 series Aironet Access Point. Is there a way that I can configure this device to delegate what VLAN a notebook is assigned to as it tries to connect? This is a pubilc hotspot area in a library, and I would like for my admin notebooks to be on one VLAN, and public notebooks to be on a separate VLAN. Is there a way that I can setup this product by say MAC address or something, like define several MAC addresses to the admin VLAN and all other MAC addresses to the public VLAN?

Thanks.

 

[bpinning]

Hey,

Setup two SSID's, one for public and one for tech's.

But i'm not sure if you can get the AP to have 2 VLAN's. I can't remember....

Brett

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://www.eyetstore.com

NSW, Australia
(Unless you want to pay for our trip?)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

[bkesting]

So I am wondering, then if I can assign a different VLAN to each SSID.

 

[Supergrrover]

Here you go

http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[bpinning]

Hey,

Thanks Supergrrover

Learn something new everyday.

Brett

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://www.eyetstore.com

NSW, Australia
(Unless you want to pay for our trip?)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~