Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VLAN on 3300 switches

Status
Not open for further replies.

greif1

IS-IT--Management
Sep 26, 2005
87
US
I have a 24 port 3300 connected to a 12 port 3300 via the back cable. The 24 port was first and the 12 port was added.
The vlans defined on the 24 port unit show as 802.1Q ports, but I never defined (I think!) Vlan ports on the second unit..... but they show up in the web interface as being vlan ports (the same port numbers as the first unit) on the second unit. Except... the Vlan ports on the second unit do not say they are 802.1Q

So.... when I try to delete the Vlan ports from being in a vlan (on the 12 port/second unit), it throws an errors which says I can't because they are not 812.1Q.

Huh?
Why are the ports on the second unit even in the vlan?
How do I get then out?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top