VLAN Management port

[abovebrd]

Is it possible to have more than one management port configured on a VLAN. I am using a catalyst 2950 with three VLAN's configured. Each VLAN supports a seperate T1 connection (different ISP's) I would like to be to have a management port excessable on each VLAN. Currently I am only able to configure 1 port. When I specify a second management port it shuts down the first one.

Can this be down ?

The switch is running in VTP server mode.
-Danny
techie@snoboarder.net

 

[wybnormal]

the question really revolves around can you have more then then one management VLAN and as far as I know, the answer is no. You get one..

http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35xu/olhelp/mgmtvlan.htm

::snip::
By default, the active management VLAN is VLAN 1, but you can designate any VLAN as the management VLAN using the Management VLAN window. Only one management VLAN can be active at a time. :::snip:::

MikeS
Find me at

http://www.packetattack.com

"The trouble with giving up civil rights is that you never get them back"