Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Virtual paging os iS3000

Status
Not open for further replies.

adrianots

Programmer
Apr 30, 2007
7
BR
Hi all,

I need to run a paging to a external loudspeaker system in a iS3000.
The OM command manual refers about commands CRPARE, CRPART, ASPACD.. etc in the "paging" section.
In the Facility Voice Manual I found the follow hint:

"3.17. PAGING
Please refer to the Facilities manual 'Networking & Routing'."

Do somebody have this manual or a step-by-step to implement this facility?
 
Hi adrianots,

you search the network manual, fnxx810e.pdf.
I'll try to send it to you.

For my interest, how you want to connect the loudspeakersystem?, which board/line?
Is there only one station for paging, or there are more speakerstations and you have to select which speaker is used?
I hope you can receive my attachement.
You have only some days to download the file.

Regards
Werner (wernergo)
 
 http://rapidshare.com/share/8E96EC9899EBB2A6FAA4BB5D895FDA63
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top