Virtual Office setup, which NTP do I need? 1

[Gem257]

Hi,

I need to set up virtual office and don't know the exact NTP to guide me through the setup process. They already have the packages, and I know the set-level CLS marks to set, but I'm sure Nortel requires something on the CDB level to be set. Right now, I don't get the SCPW prompt on my TN when programming.

Thanks everyone!

 

[bhassell2000]

The Station Control Password Length (SCPL) feature is used to set a standard password length for phones used in a Virtual Office solution. This applies to phones that are configured as Host or Virtual phones. The standard password length should be set to seven digits.

>LD 15 <CR>
REQ: CHG <CR>
TYPE: FFC <CR>

TYPE FFC_DATA
CUST 0 <CR>
CCRS <CR>
SCPL 7 <CR>
SBUP <CR>
FFCS <CR>
ADLD <CR>

***NOTE***
If a “SCH8885” error code is displayed, a SYS LOAD will be required before the changes take affect.


Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/pub/buddy-hassell/7/5a5/b8b

 

[Gem257]

Thank you, Buddy. Turns out I didn't need to sysload the switch.