Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Virtual Interface on the inside?

Status
Not open for further replies.

hennessyk

IS-IT--Management
Aug 9, 2007
4
We currently have two Pix 515 in failover setup, but we also have two netgear (layer3) switches connected to the Pix for failover on the switch side of things. The problem is if PIX#1 is connected to Netgear#1 and the Netgear fails, the network goes down. Is there a way to create a virtual interface with two physical interfaces on a PIX 515 so i can plug in the virtual connection to both Netgear Switches? That way if one Switch goes down the second Switch will keep the network up. Thanks.
 
I am pretty certain that failover can be configured to monitor both the public and private interface. If communications is lost of either on, it will initiate a failover. There is nothing in the PIX code (that I know of) that will allow you to do what you ask.

It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top