unprophete
Technical User
having 10 virtual SAN disks on a client LPAR seen over two VIO Servers (MPIO, vscsi0-VIO1, vscsi1-VIO2), how to balance so path through VIO1 is primary for 5 disks and through VIO2 is primary for the rest (5) of disks?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
virtual disks access
- Thread starter unprophete
- Start date
- Status
having 10 virtual SAN disks on a client LPAR seen over two VIO Servers (MPIO, vscsi0-VIO1, vscsi1-VIO2), how to balance so path through VIO1 is primary for 5 disks and through VIO2 is primary for the rest (5) of disks?
Read all about it. The best I can remember you are looking for priority path.
- Thread starter
- #3
unprophete
Technical User
thank you. indeed I can switch traffic using priority attribute in chpath command
- Status
Similar threads
- Locked
- Question