A little help please....
I have a Netscreen 100, with older software (2.6.1r7.1).
I am basicaly trying to set up port forwarding.
It will not allow me to set a VIP on the Untrust interface address, so I am trying to use another public address I have assigned.
Here is what I am trying to do
Public IP x.x.x.59 port xxxx to Internal IP x.x.x.253 port xxxx (or yyyy)
I have defined a custom service for the port I need, I have set up the VIP using that IP and service, and added a policy for anyuntrust to any VIP on the Untrused.
I have the x.x.x.59 listed in the address list (untrust) and the x.x.x.253 in the address list (trusted).
The x.x.x.59 will not ping from the outside, and I get no connection to the port.
What am I missing?
I have a Netscreen 100, with older software (2.6.1r7.1).
I am basicaly trying to set up port forwarding.
It will not allow me to set a VIP on the Untrust interface address, so I am trying to use another public address I have assigned.
Here is what I am trying to do
Public IP x.x.x.59 port xxxx to Internal IP x.x.x.253 port xxxx (or yyyy)
I have defined a custom service for the port I need, I have set up the VIP using that IP and service, and added a policy for anyuntrust to any VIP on the Untrused.
I have the x.x.x.59 listed in the address list (untrust) and the x.x.x.253 in the address list (trusted).
The x.x.x.59 will not ping from the outside, and I get no connection to the port.
What am I missing?