oliverbeat
Technical User
Hello,
I have 2 card ethernet card attached to the VIOS. One on a mgt VLAN (but the card is 100/Full), the other one on the service (10/100/1000).
My problem is when I have setted the virtual card on the HMC for the VIOS and VIOC, I cannot create the etherchannel on the VIOS server on the card 100/full, it works for the other card with the command mkvdev -dev ...
Do you think 100/Full cannot be used on virtual card ?
Because the backup and NIM are using the VLAN of mgt and it is very important for to be able to create 2 virtual card for a VIOC.
May be I did something wrong during the creation of virtual ethernet on the HMC but I don't know what...
So if you have any idea.
Thanks in advance
I have 2 card ethernet card attached to the VIOS. One on a mgt VLAN (but the card is 100/Full), the other one on the service (10/100/1000).
My problem is when I have setted the virtual card on the HMC for the VIOS and VIOC, I cannot create the etherchannel on the VIOS server on the card 100/full, it works for the other card with the command mkvdev -dev ...
Do you think 100/Full cannot be used on virtual card ?
Because the backup and NIM are using the VLAN of mgt and it is very important for to be able to create 2 virtual card for a VIOC.
May be I did something wrong during the creation of virtual ethernet on the HMC but I don't know what...
So if you have any idea.
Thanks in advance