Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

View bandwidth utilization on Marconi switches

Status
Not open for further replies.
theundergod

theundergod

IS-IT--Management
Feb 4, 2005
30
US
Anyone familiar with Marconi equipment? I work with ATM quite a bit and am trying to find out how to look at the bandwidth utilization of a Virtual Path. This particular instance is dealing with a BXR48000. I know with most Marconi switches you can just do a "vpt sh" command to see what is being used at that time (which works with the BXR48l) but if the path is set up as a CBR then the bandwidth will always be the same. Is there any way to actually see how much "user" data is being used under a path that is set up as CBR?
 
Status
Not open for further replies.

Similar threads

thewmatz
  • Locked
  • Question
diable Line call on a NEC SV9100
Replies
0
Views
102
thewmatz
thewmatz
GoranCarter
  • Locked
  • Question
Due to the fault of the ML1 Board on a PTN 950, A CES Service Was Unavailable
Replies
0
Views
65
GoranCarter
GoranCarter
jwsimm48
  • Locked
  • Question
Unmanaged Switches
Replies
1
Views
54
cajuntank
cajuntank
VTG407
  • Locked
  • Question
configuring dual nics on a video managment server
Replies
2
Views
84
cajuntank
cajuntank
ctekam
  • Locked
  • Question
DHCP Server no longer handing out IP addresses on my network
Replies
1
Views
90
cajuntank
cajuntank

Part and Inventory Search

Sponsor

Back
Top