TChachra
IS-IT--Management
- May 3, 2005
- 18
- 0
- 0
HI.
We are having problems with our Cisco 2811's and Polycom video conferencing systems. Basically when we initiate an IP call via the internet the remote site can see and hear us..but we cannot see or hear them.
It is the same problem that is in this thread:
The polycom has a NAT address from the Cisco and we have tried everything from specific ports to all traffic to the polycom with no success. Any help appreciated.
We are having problems with our Cisco 2811's and Polycom video conferencing systems. Basically when we initiate an IP call via the internet the remote site can see and hear us..but we cannot see or hear them.
It is the same problem that is in this thread:
The polycom has a NAT address from the Cisco and we have tried everything from specific ports to all traffic to the polycom with no success. Any help appreciated.
