Does anyone know how to set up three digital ports on a TN2214 card for a polycom view station 512. I have found a previous post from user that says you can have two PDM for each digital port. However, when I try to select yes to allow for a "secondary data module" on a PDM data-module I get the error "cannot administer secondary data module first". Am I setting this up correctly??? What do I need to do? Please help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Video Conf Help!!!
- Thread starter kbrain
- Start date
I think where you are getting lost is that you are trying to setup the ports as stations when you should be setting them up as data-moduals. And, yes, you can setup two pdm's for one port, you will just have two different extensions. On the first one you would leave the field Secondary data module as n and change it to yes for the second.
Hope this helps.
Hope this helps.
- Status
Similar threads
- Locked
- Question