Hi!
We've 7140 FC-SSA converter connected D40 SSA drawer with 16*34GB disks. The drawer is connected to IBM 2109-F16 switch. AIX 4.3.3 is the operating system with ML11.
I set a disk to service mode is the loop and then replace the failing disk with a good one than set the disk back to normal mode and try to configure to hdisk. It seems the cfgmgr configure the disk as hdisk, but I can't register the PVID of that disk.
chdev -l hdsik139 -a pv=yes not working
I get the following error:
Method error (/usr/lib/methods/chgdisk):
0514-047 Cannot access a device.
Any idea?
We've 7140 FC-SSA converter connected D40 SSA drawer with 16*34GB disks. The drawer is connected to IBM 2109-F16 switch. AIX 4.3.3 is the operating system with ML11.
I set a disk to service mode is the loop and then replace the failing disk with a good one than set the disk back to normal mode and try to configure to hdisk. It seems the cfgmgr configure the disk as hdisk, but I can't register the PVID of that disk.
chdev -l hdsik139 -a pv=yes not working
I get the following error:
Method error (/usr/lib/methods/chgdisk):
0514-047 Cannot access a device.
Any idea?