VIC-2FXO setup on CME

[biglebowski]

Does anyone have a guide on how to setup the VIC-2FXO card on a CME 3.2?

I have a lab setup at home with CME 3.2 on a 2610xm and 2x 7940 phones connected via a 2912 switch. I have installed the VIC-2FXO on the 2610xm and need to set it up for i/c and o/g calls but don't know how.

When I was born I was so suprised I didn't talk for 18 months

 

[jeter]

The two examples below should get you started in the right
direction.. Just use your correct voice port...

dial-peer voice 5 pots
incoming called-number
direct-inward-dial
port 0/0/0:23


!
dial-peer voice 1 pots
description Local Dialing
destination-pattern 9[2-9]......
direct-inward-dial
port 0/0/0:23
forward-digits 7
!



Some people are like slinkies. Not really good for anything but they bring a smile to your face when pushed down the stairs.


Tek-TIP Member 19,650