VG224 configuration

[cgangadeen]

I have to configure VG224 analogue gateway using MGCP for Cisco CallManager 4.2. I looked for the configuration of the VG224 and CCM but did not find any documentation which explains clearly how to configure. Can anyone send a link of explain to me the step by step procedure in configuring the VG224?

Please help.

 

[pmoorey]

The VG224 is essentially no different from any other voice gateway, just check the Cisco website for instructions on adding an MGCP gateway.

Each of the voice-ports will appear on the gateway configuration on CM, from there you can specify the DNs etc.

http://www.cisco.com/univercd/cc/td...r/vvfax_c/callc_c/ccm_c/intcnf1.htm#wp1053470

HTH

Regards,


Peter
CCNA, Cisco Qualified Specialist

 

[cgangadeen]

Thank you very much Peter