Hi All. HP2470 11.11, lost power last weekend & have been battling with how to get our system to recognize VG01 again. vgscan ->
Following Physical Volumes belong to one Volume Group.
Unable to match these Physical Volumes to a Volume Group.
Use the vgimport command to complete the process.
/dev/dsk/c4t2d0
/dev/dsk/c4t3d0
/dev/dsk/c4t14d0
vgscan: has no correspoding valid raw device file under /dev/rdsk.
Verification of unique LVM disk id on each disk in the volume group
/dev/vg01 failed.
All of the drives are checking out OK via mstm & claimed under ioscan. Devices ARE under /dev/rdsk & /dev/dsk.
I have renamed my lvmtab file & run vgscan again with no success of updating the lvmtab.
There is data on these drives & they are being used. Any idea on how to fix this w/o losing all my data in VG01?
Following Physical Volumes belong to one Volume Group.
Unable to match these Physical Volumes to a Volume Group.
Use the vgimport command to complete the process.
/dev/dsk/c4t2d0
/dev/dsk/c4t3d0
/dev/dsk/c4t14d0
vgscan: has no correspoding valid raw device file under /dev/rdsk.
Verification of unique LVM disk id on each disk in the volume group
/dev/vg01 failed.
All of the drives are checking out OK via mstm & claimed under ioscan. Devices ARE under /dev/rdsk & /dev/dsk.
I have renamed my lvmtab file & run vgscan again with no success of updating the lvmtab.
There is data on these drives & they are being used. Any idea on how to fix this w/o losing all my data in VG01?