VFP .exe Wizard QuickStart Removal

[deltafun]

Hi,

We have developed a VFP application that runs from and .exe, created using the application wizard. It all works fine except when we start the exe we get a QuickStart window appearing with the options Open, Cancel and Browse. This gives us the option to open our VFP program. The thing is we only have one VFP program, can we remove the Quickstart box from appearing?......... and if so where in the automatically created code is the code we need to alter located or what strings are we looking to change?

Thanks in advance

David

 

[ramani]

Hi
In your project, I hope you have set ONE prg or form or menu as MAIN. If not, set the one with which you want to start as the MAIN.

Also, hope you have not stated anything contrdictory in your config.fpw.

SET SAFETY OFF
SET CONFIRM OFF
SET TALK OFF
etc set commands are usualy set in the MAIN to avoid talk status etc.

Hope this helps you. ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com
LET KNOW IF THIS HELPED. ENOUGH EXPERTS ARE HERE TO HELP YOU OUT! BEST OF LUCK